JBL

GX-A604

Details
Artikelnr. GX-A604_
Variations
  • Select Color
Product Actions
Add to cart options

Additional Information
GX-A604 är ett 435-watts fyrkanals fullfrekvenskraftverk med variabla elektroniska delningsfilter och variabel Bass EQ på bakre kanalerna – en flexibel grund att bygga systemet på. All den kraften finns i ett 52 mm högt, 206 mm brett och 300 mm djupt paket som gör GX-A604 enkel att montera och en perfekt grund för ett riktigt sofistikerat system. Funktionerna innefattar gjutna kylflänsar av aluminium inbyggda elektroniska delningsfilter och Bass Boost-basförstärkning.
At a Glance:
  • 85 watt RMS x 4 kanaler i 2 ohm
  • Stöder 4-kanals fullregister och högpassdrift, 3-kanals mixat läge eller 2-kanals bryggat läge för subwoofer
  • Växlingsbart (på/av) 12 dB/oktav 80 Hz högpassfilter för kanalerna 3 och 4
  • Växlingsbar (på/av) Bass Boost ger +12 dB vid 45 Hz på kanalerna 1 och 2
  • 60 watt RMS x 4 kanaler i 4 ohm
  • RCA-ingångar
  • 4-kanals fullfrekvensförstärkare
  • 170 watt RMS x 2 bryggat till 4 ohm
  • Högnivåingångar med automatisk påsättning via MOLEX-anslutning
  • Klass AB
  • Helt variabelt 12 dB/oktav HP/LP/FLAT-delningsfilter för kanalerna 1 och 2
What's in the Box:
  • 1 x GX-A604
  • Bruksanvisning
GX-A604 är ett 435-watts fyrkanals fullfrekvenskraftverk med variabla elektroniska delningsfilter och variabel Bass EQ på bakre kanalerna – en flexibel grund att bygga systemet på. All den kraften finns i ett 52 mm högt, 206 mm brett och 300 mm djupt paket som gör GX-A604 enkel att montera och en perfekt grund för ett riktigt sofistikerat system. Funktionerna innefattar gjutna kylflänsar av aluminium inbyggda elektroniska delningsfilter och Bass Boost-basförstärkning.
Product Features:
  • Equipped with both low-level and high-level inputs
    The GX-A604 is equipped with both low-level and high-level inputs, allowing conncetion to virtually any factory or aftermarket head unit. Low-level input is made via standard RCA connectors and high-level inputs made via a supplied Molex connector and harness.
  • Electronic crossover
    The 12dB per octave electronic crossover is fixed at 80Hz and can be selected either high-pass or low-pass. This allows the GX-A602 can be used as a an amplifeir to drive full-range speakers or as a subwoofer amplifier.
  • Bass Boost circuit
    The GX-A602 also has an switchable bass boost circuit on the rear channels that adds a fixed at 45Hz and will provide+12dB of gain.
Legendariskt JBL-ljud

Du behöver inte åka långa vägar för att hitta den legendariska kraft som utmärker JBL-ljudet.

Highlights:
Manuals & Downloads:
Allmänna specifikationer:
Number of Channels
4 channels
Audio Specifications:
Signal-to-Noise Ratio
93dB
Total Peak Power Output
435W
THD + N
;less than 1%
Frequency Response
20Hz-20kHz
Input Sensitivity
20mV-20V
Bridged Power Output
170W x 2 into 4 ohms
4-Ohm Power Output
60 Watts RMS x 4 channels
Variable Bass Boost
0 to + 12dB @45Hz
2-Ohm Power Output
85 Watts RMS x 4 channels
Dimensions:
Width (in)
8-1/8
Depth (mm)
300
Height (mm)
52
Depth (in)
11-13/16
Width (mm)
206
Height (in)
2-1/16
GX-A604 is rated 4.7 out of 5 by 3.
Rated 5 out of 5 by from Van Instalation and it is wicked I have just had this installed in my Companies delivery van and it is awesome, it is firing a pair of 3 ways as Mid and Tweeter which I will change for a pair of JBL's now and an 8inch passive sub and it sounds great, got to get a monorail for the sub and use the GX-A604 for my high range in the dash, I am a JBL Lover any ways, I use the 2 control 10's in my home cinema set up. I highly recommend this amp to anyone.
Date published: 2018-02-11
Rated 5 out of 5 by from Great inexpensive amp! I'm using this amp driven by a JBL MS-8. The amp is a good step up from your typical 20W/channel systems. Very noticeable gain difference in that it plays loud and clean w/little distortion. Using 2 of 4 channels bridged for a passive sub and that works well too. Recommended.
Date published: 2016-11-17
Rated 4 out of 5 by from Great Amplifier but... I bought this amp and it has a lot of settings. But if you are connecting 2 middle speakers with 1 subwoofer ( or as my case only 1 subwoofer ) you definitely need power capacitator to power up the amp, otherwise, it will drop off when you pump the volume up. It's heating up so it's better to mount it in open space not in closed box or confined space
Date published: 2018-03-02
  • y_2018, m_11, d_12, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_sv_SE, sid_gx-a604_, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_harmanaudio

hello can I install this amp with two JBL GTO 939? thank you!

Asked by: RogerioSwiss
The amp gives 85 watts at 2 ohms while the GTO 939 requires 100W of power at 3 ohms which is a little short of power, you can still connect it to each other but they won't bring each other to their full potential.
Answered by: Mario at Customer Service
Date published: 2018-08-27

Sir , my question is i have to install amplifire and subwoofer in volkswagen polo highline plus Amplifire - GXA604H peak power 1200w Subwoofer - gtx 1300T What gauge of wire i'll use?

Asked by: Gyan
Hi! Normally, if you are connecting the subwoofer to the amp, you could use an 8-12" gauge wire.
Answered by: Nick F
Date published: 2018-05-31

What gauge of wire i'll use for gx a 604 1200 peak power

Asked by: Gyan
You will need 14-16 gauge wires for these amplifiers.
Answered by: Dan E
Date published: 2018-05-30

Can i use this to power my 4 jbl gx602’s?

Asked by: Ibrahin99
Yes the GXA604 amplifier will work with the GX 602 speakers without any issues.
Answered by: Nick F
Date published: 2018-04-04

Can the GX-A604 power my GTO 609c component speakers and GT5-12 subwoofer?

Asked by: airjao23
Yes, that would be no problem at all.
Answered by: Mario at Customer Service
Date published: 2018-01-28

Hello. Does this amp work in 3 channels? having 2 straight for components and the other 2 bridged for a subwoofer? Thanks :)

Asked by: Max_Power
We would like to work with you directly to help you with your issue. Please submit a case request at https://www.jbl.com/support-contact.html and the Customer Service Team will be more than happy to assist you.
Answered by: Steven M
Date published: 2018-01-11

I'm using the GX-604 4 channel amp with 4 JBL 6.5" CS762 coaxial speakers. What should I have be level set to? 0.2v or 4.0v? Thanks

Asked by: Ainsley
Hi Ainsley, Thank you for the question. You might find the answer to your question in our Product Support FAQ and Knowledgebase Sections.  The link is located at the top of this page.  To submit a support case, please fill out the Contact Us form at the same location.
Answered by: Danny HARMAN
Date published: 2018-02-09

Good day all, I'm planning to buy a GX 602 for the rear speakers, while GX 402 for front speakers of my compact car. Is this GX A604 suitable for this setup?

Asked by: Jarn
Hi the GX 602 and the GX 402 can handle 60W and 35W respectively while the GX A604 drives 60W at 4 ohms which would be too much for the GX 402 than it can handle.  I would suggest to choose a different speaker for the front that can handle 60W.  If you need further assistance in looking for a speaker,Please submit a case request at https://www.harmanaudio.com/support-contact.html and the Customer Service Team will be more than happy to assist you.
Answered by: Mario at Customer Service
Date published: 2017-12-13
  • y_2018, m_11, d_12, h_21CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_37
  • loc_sv_SE, sid_gx-a604_, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_harmanaudio

Sökresultat för ""