Club 4505

Artikelnr. CLUB4505-
  • Select Color
Product Actions
Add to cart options

Additional Information
At a Glance:
  • Kompakt storlek
  • Hög- och lågnivåingångar
  • Variabla delningsfilter och bass boost
  • ADAS-ingång
  • HALOsonic-mixingingång
What's in the Box:
  • 1 Club-4505-förstärkare
  • 4 kablar för högnivåingångar
  • 2 reservsäkringar
  • 2 tvåfärgade klistermärken
  • 1 snabbguide
De nya högpresterande JBL Club-förstärkarna ger dig ett JBL-ljud i världsklass från ett kompakt chassi som är byggt för att passa i fler fordon, även om det är ont om plats. Club-förstärkarna finns i 4-kanaliga modeller, 5-kanaliga modeller och monomodeller, och har variabla delningsfilter och bass boost för en exakt kontroll och inställning, plus hög- och lågnivåingångar som gör att de lätt integreras med de flesta bilstereoanläggningar. De är också kompatibla med flera fordonsteknologier, inklusive många avancerade förarstödsystem och Harman HALOsonic-systemet, som är en uppsättning akustiska lösningar som kan efterlikna motorljud för en bättre körupplevelse i hybrid- och elbilar, reducera vägbuller för en bättre lyssningsupplevelse och mycket mer.
Product Features:
  • Kompakt storlek
    JBL Club-förstärkarna har ett slimmat chassi och kompakt format för att passa i fler fordon, även om utrymmet är begränsat.
  • Hög- och lågnivåingångar
    Ingångar på både högtalarnivå och lågnivå gör att Club-förstärkarna integreras med i stort sett vilken bilstereo som helst, eftermarknad eller fabriksny.
  • Variabla delningsfilter och bass boost
    Till skillnad från många andra förstärkare i samma prisklass har JBL Club variabla elektroniska delningsfilter och en bass boost-krets för finjustering.
  • ADAS-ingång
    Club-fullregisterförstärkarna har en ADAS-ingång som åsidosätter ljudsignalen när de ansluts till ADAS-tillbehör. Dessutom kan ADAS-varningar angående dirigering tilldelas under inställningen av förstärkaren med hjälp av den panelmonterade kontrollen.
  • HALOsonic-mixingingång
    Club-förstärkarna kan också fungera med HALOsonic-system i vissa fordon, vilket minskar buller utifrån för en bättre ljudupplevelse.
Manuals & Downloads:
Allmänna specifikationer:
Signal-to-Noise Ratio(Full Range Channels)
>85dB (ref 1W output @ 4Ω)
Power Output, 4Ω(Subwoofer Channel)
320W rms x 1, <1.0% THD+N
Power Output, 4Ω(Full Range Channels)
45Wrms x 4, <1.0% THD+N
Power Output, 2Ω(Full Range Channels)
65Wrms x 4, <1.0% THD+N
Max Power
1800W Peak
Power Output, 4Ω Bridged(Full Range Channels)
130Wrms x 2, <1.0% THD+N
Power Output, 2Ω(Subwoofer Channel)
500Wrms x 1, <1.0% THD+N
Signal-to-Noise Ratio(Subwoofer Channel)
>80dB (ref 1W output @ 2Ω)

I have the Club 4505 amp, A set of Club 5000C, set of Club 6500C and 2 WS1200 woofers. My question is how would be best to hook up the 2 woofers to the woofer output on the amp? Which Ohm settings would I use on the amp and the woofer?

Asked by: Rick C
We would like to work with you directly to help with your inquiry. Please submit a case request at https://www.jbl.com/support-contact.html and the Customer Service Team will be more than happy to assist you.
Answered by: Karl Vincent
Date published: 2018-09-30


Asked by: raicerda
Hi! Both amplifiers are the same in terms of audio specifications. The main difference between the two would be the materials that were used on the amps.
Answered by: Nick F
Date published: 2018-06-28

i have purchased this amp along side the s3 1124 subwoofer now since the sub can handle 500rms at either 2 or 4 ohms i dont understand what to switch it to as the power output of the amps says 320 rms at 4 ohms and 500rms at 2 ohms how do i wire it for 2

Asked by: Ryanry
Hi, and thank you for supporting JBL! The power handling of the woofer is independent of the impedance, so the 500 W is true no matter if you switch it to 2 Ohms or 4 Ohms. When the amplifier can handle a 2-ohm load, you may as well take advantage of the extra power it can produce into the lower impedance, and use the 2-ohm setting on the woofer. Please note that the lower impedance is a tougher load on the amplifier, so if you push your system to the limit, you may have the amplifier overheat or disconnect due to activating the protection curcuits because it is being driven too hard. If this happens, I would suggest to switch the woofer to the easier load of 4 Ohms. There is a switch on the woofer that you use to select 2 or 4 Ohms.
Answered by: Bo Harman
Date published: 2018-06-04

is this amplifier a D class?

Asked by: carlosedgoav
Yes, the Club 4505 is a class D amplifier.
Answered by: Steven M
Date published: 2018-04-18

Is the Subwoofer channel on this amp mono?

Asked by: Juggernaut78
The subwoofer channel on the JBL Club 4505 amp was designed as a mono output that can handle up to 320 W rms at 4 ohms or 500 W rms at 2 ohms.
Answered by: Steven M
Date published: 2018-03-29

Im planning on getting a Stage 1220B sub and 4 GTO 629 speakers for this amp would i need to upgrade my alternator?

Asked by: Dermy
We would like to work with you directly to help with your inquiry. Please submit a case request at https://www.jbl.com/support-contact.html and the Customer Service Team will be more than happy to assist you.
Answered by: Steve S
Date published: 2018-03-22

I set this amp with 4 GX602s speakers and S2-1224SS subwoofer. What do you recommend for ohm setting of the sub? the amp can handle both 2ohms and 4 ohms setting, what ohm will I switch the subwoofer? Is there any difference in sound quality?

Asked by: Jan D
The S2 124-ss can only handle 275W RMS on either 2 ohms or 4 ohms, The Club 4505 has a subwoofer channel of 320W for 4 ohms and 500W for 2 ohms. The Subwoofer cannot handle the 2 ohm as it's too high but it can handle the 4 ohms rating even if it's above 275W but please be sure not to crank up the volume too much as it may damage the speaker in the long run.
Answered by: Mario at Customer service
Date published: 2018-03-22

What's the adas input phone jack for? Can I plug an bass remote level there?

Asked by: ERIC2600
If you have a car that has a Driver Assist system, where it will beep at you or talk to you if you are too close to another vehicle, or whatever, and you are about to remove your stock amplifier and replace it with the Club 4505, you can connect your Driver Assist system to this amplifier so that you continue to use that feature. Bass remote level controls are not compatible to be connected to this port.
Answered by: Steven M
Date published: 2018-03-11
  • y_2018, m_11, d_13, h_5CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_25
  • loc_sv_SE, sid_club4505-, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_harmanaudio

Sökresultat för ""